Specifications

System Commands
Polycom, Inc. 4–323
v35prefix
Sets or gets the V.35 dialing prefix. It assumes that a profile has already been
selected.
Syntax
v35prefix get “valid speed”
v35prefix set “valid speed” [“value”]
Feedback Examples
• v35prefix set 56
returns
v35prefix 56 <empty>
• v35prefix set 112 ”#005”
returns
v35prefix 112 ”#005”
and associates the dialing prefix 005 with the speed 112
•
v35prefix get 112
returns
v35prefix 112 ”#005”
See Also
See the v35profile command on page 4-325 .
Parameter Description
get Returns the current setting for “valid speed” .
set Sets the V.35/RS-449/RS-530 prefix when followed by
a
“value” parameter. To erase the current setting, omit
the “value” parameter.
“valid speed” Valid speeds are 56, 64, 2x56, 112, 2x64, 128, 168,
192, 224, 256, 280, 320, 336, 384, 392, 7x64, 504,
512, 560, 576, 616, 640, 672, 704, 728, 768, 784, 832,
840, 14x64, 952, 960, 1008, 1024, 1064, 1088, 1120,
1152, 1176, 1216, 1232, 1280, 1288, 21x64, 1400,
1408, 1456, 1472, 1512, 1536, 1568, 1600, 1624,
1664, 1680, 1728, 28x64, 1856, 1920, all.
The parameter
“all” lists all the available speeds and
their associated dialing prefixes.
“value” V.35/RS-449/RS-530 prefix, which is a function of your
DCE. Consult the DCE user guide for information.