Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4–300 Polycom, Inc.
st
Sets or gets the st serial interface control signal (send timing: clock) setting.
This command is only applicable if you have a V.35 network interface
connected to your system.
Syntax
st <get|normal|inverted>
Feedback Examples
• st normal
returns
st normal
• st inverted
returns
st inverted
• st get
returns
st inverted
Comments
The default setting is “normal” .
Parameter Description
get Returns the current setting.
normal Sets the signal to normal (falling edge sends data).
inverted Sets the signal to inverted (rising edge sends data).