Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4–288 Polycom, Inc.
sleep
Puts the system in sleep mode within 15 seconds and returns sleep.
Syntax
sleep
sleep <register|unregister>
Feedback Examples
• sleep
returns
sleep
and puts the system in sleep mode within 15 seconds
•
sleep register
returns
sleep registered
• If entered again,
sleep register
returns
info: event/notification already active:sleep
• sleep unregister
returns
sleep unregistered
• If entered again,
sleep unregister
returns
info: event/notification not active:sleep
See Also
To wake the system from sleep mode, use the wake command on page 4-342 .
Parameter Description
sleep Puts the system in sleep mode if not followed by other
parameters.
register Registers for sleep or wake events.
unregister Unregisters from sleep or wake events.