Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4–278 Polycom, Inc.
rt
Sets or gets the RT serial interface control signal (receive timing: clock). This
command is only applicable if you have a V.35 network interface connected to
your system.
Syntax
rt <get|normal|inverted>
Feedback Examples
• rt normal
returns
rt normal
• rt inverted
returns
rt inverted
• rt get
returns
rt inverted
Comments
The default setting is “normal” .
Parameter Description
get Returns the current setting.
normal Sets the signal to normal (rising edge receives data).
inverted Sets the signal to inverted (falling edge receives data).