Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4–258 Polycom, Inc.
prilinebuildout
Sets or gets the PRI line buildout for a T1 interface.
Syntax
prilinebuildout get
prilinebuildout set <0|-7.5|-15|-22.5>
prilinebuildout set <0-133|134-266|267-399|400-533|534-665>
Feedback Examples
• prilinebuildout set -7.5
returns
prilinebuildout -7.5
• prilinebuildout get
returns
prilinebuildout -7.5
Comments
If you are using an internal CSU, enter the output attenuation in dB. If you are
using an external CSU, enter the output attenuation in feet.
See Also
The PRI CSU mode for a T1 interface is set using the pricsu command on
page 4-256 .
Parameter Description
get Returns the current setting.
set Sets the PRI line buildout. It requires an output
“attenuation in dB” or an “attenuation in
feet” .
0|-7.5|-15|-22.5 Output attenuation values in dB. For internal CSUs.
0-133|134-266|
267-399|400-533|
534-665
Output attenuation values in feet. For external CSUs.