Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4–256 Polycom, Inc.
pridialchannels
Sets or gets the number of PRI channels to dial in parallel. This command is
only applicable if you have a PRI network interface connected to your system.
Syntax
pridialchannels get
pridialchannels set {1..n}
Feedback Examples
• pridialchannels set 3
returns
pridialchannels 3
• pridialchannels get
returns
pridialchannels 3
Comments
By default, ISDN channels are dialed three at a time. On PRI systems, you can
choose the number of channels to dial in parallel.
Parameter Description
set Sets the number of PRI channels to be dialed in
parallel when followed by a parameter from {1..n} . To
erase the current setting, omit the parameter.
get Returns the current number of channels dialed in
parallel.
{1..n} Range of numbers of PRI channels that can be dialed
in parallel. For PRI T1, the range is 1..12 . For PRI E1,
the range is
1..15 .