Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4–250 Polycom, Inc.
preset
Sets the presets or goes (moves) to the presets for the near or far camera source.
Also registers or unregisters the API session to give notification when the user
sets or goes to presets.
Syntax
preset <register|unregister>
preset register get
preset far <go|set> <{0..15}>
preset near <go|set> <{0..99}>
Feedback Examples
• preset register
returns
preset registered
• preset near go 1
returns
preset near go 1
and moves the near-site camera to the preset 1 position
• preset near set 2
returns
preset near set 2
and saves the current location/position of the near-site camera as preset 2
Parameter Description
register Registers the system to give notification when the user or
far site sets or goes to a preset. Returns the current
preset registration state when followed by the get
parameter.
unregister Disables register mode.
far Specifies the far camera. Requires a set or go parameter
and a preset identifier.
go Moves the camera to a camera preset. Requires a
“preset” parameter.
set Sets a camera preset. Requires a “preset” parameter.
{0..15} , {0..99} Camera preset identifier. Must be an integer in the range
{0..15} for a far-site camera or {0..99} for a near-site
camera.
near Specifies the near camera. Requires a set or go
parameter and a preset identifier.