Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4–238 Polycom, Inc.
ntpserver
Sets or gets an Network Time Protocol (NTP) server, using the IP address or
the DNS name of the server.
Syntax
ntpserver get
ntpserver set [“xxx.xxx.xxx.xxx”|“server name”]
Feedback Examples
• ntpserver set
returns
ntpserver <empty>
• ntpserver set 192.168.1.205
returns
ntpserver 192.168.1.205
• ntpserver get
returns
ntpserver 192.168.1.205
Comments
This command allows you to use an internal time server and thus synchronize
the system’s time with the time on your internal network. The system uses this
time only for the local Call Detail Report.
Parameter Description
get Gets the IP address of the NTP server.
set Sets the IP address of the NTP server when followed
by a valid parameter. To erase the current setting, omit
the [“xxx.xxx.xxx.xxx”|“server name”] parameter.
“xxx.xxx.xxx.xxx” The IP address of the NTP server.
“server name” The DNS name of the NTP server.