Specifications

Room Integration
Polycom, Inc. 1–17
Sony BRC-H700 PTZ
To connect a Sony BRC-H700 PTZ camera to a Polycom HDX 9000 Series system:
You can connect a Sony BRC-H700 PTZ camera to a Polycom HDX system
using:
• A— DVI to VGA Monitor Cable on page 2-17
• B— 8-pin mini-DIN to DB-9 on page 2-40
• C—VGA extension cable
To provide XGA output (1024x768), you must install the optional Sony HFBK-XG1
card into the slot on the back of the Sony BRC-H700 PTZ camera.
Up to 100 ft
A
B
C
IOIOIO
IOIOIO
Another option is to use a VGA cable for cable C and to use a VGA/DVI-A adapter
(part number 1517-52689-001) for cable A. The VGA/DVI-A adapter is a solid
overmolded adapter that connects to the Polycom HDX 9000 Series system side of
cable C and adapts from cable C’s VGA connector to a DVI-A connector to plug into
the Polycom HDX 9000 Series system.