Specifications

System Commands
Polycom, Inc. 4–223
mpmode
Sets or gets the multipoint conference viewing mode for the system in a
multipoint call. The multipoint mode can be set to auto, discussion,
presentation, or fullscreen. By default, it is set to auto.
Syntax
mpmode <get|auto|discussion|presentation|fullscreen>
Feedback Examples
• mpmode auto
returns
mpmode auto
• mpmode discussion
returns
mpmode discussion
• mpmode get
returns
mpmode discussion
Comments
This option is not available unless the multipoint option is enabled.
Parameter Description
get Returns the current setting.
auto In Auto mode, the system switches between Full
Screen Mode and Discussion mode, depending on the
interaction between the sites. If one site is talking
uninterrupted for 15 seconds or more, the speaker
appears full screen.
presentation In Presentation mode, the person who is speaking
appears full screen to the far sites, while the person
who is speaking sees all the other sites on a split
screen.
discussion In Discussion mode (also called Continuous Presence
mode), every site sees all the sites in the meeting at
the same time, on a split screen.
fullscreen In Full Screen mode, every site in the call sees the
current speaker, or the latest person to speak, on the
full screen.