Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4–204 Polycom, Inc.
ldapserveraddress
Sets or gets the LDAP server address.
Syntax
ldapserveraddress get
ldapserveraddress set [“address”]
Feedback Examples
• ldapserveraddress get
returns
ldapserveraddress hardware.domain.polycom.com
• ldapserveraddress set software.domain.polycom.com
returns
ldapserveraddress software.domain.polycom.com
Parameter Description
get Returns the current setting.
set Sets the IP address or the DNS name of an LDAP
server. To erase the current setting, omit the “
address ”
parameter.
Note: This parameter does not change the setting on
the server. Instead, this parameter changes how the
Polycom system recognizes the server.
“address” Specifies the IP address or the DNS name of an LDAP
server.
The DNS name requires alphanumeric characters.
Valid characters include:
0 through 9
a
through z
A through Z
-
Note: The “-” character cannot be used as the first or
last character in the DNS name.