Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4–186 Polycom, Inc.
ipprecaudio, ipprecfecc, ipprecvideo
Sets or gets the IP Precedence priority level (Type of Service Value) for audio,
far-end camera control (FECC) and other call control channels, and video. The
value for each can be between 0 and 7.
Syntax
ipprecaudio get
ipprecaudio set {0..7}
ipprecfecc get
ipprecfecc set {0..7}
ipprecvideo get
ipprecvideo set {0..7}
Feedback Examples
• ipprecaudio set 5
returns
ipprecaudio 5
• ipprecaudio get
returns
ipprecaudio 5
Comments
The ipprecfecc command is equivalent to the Control setting in the user
interface.
If the typeofservice command on page 4-311 is set to
diffserv , these
commands are not applicable.
Parameter Description
get Returns the current setting.
set Sets the IP precedence. A priority level is required. This
must be an integer in the range
{0..7} .