Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4–182 Polycom, Inc.
ipaddress
Sets or gets the LAN IP address (IPv4) of the system.
Syntax
ipaddress get
ipaddress set “xxx.xxx.xxx.xxx”
Feedback Examples
• ipaddress set 192.168.1.101
returns
ipaddress 192.168.1.10 1
•
ipaddress get
returns
ipaddress 192.168.1.101
Comments
Use this command when you need to allocate a static IP address to your
system. After making a change, you must restart the system for the setting to
take effect.
Parameter Description
get Returns the current setting.
set Sets the LAN IP address to the “xxx.xxx.xxx.xxx”
parameter. This setting can only be changed when
DHCP is off.
“xxx.xxx.xxx.xxx” IP address of the system.