Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4–108 Polycom, Inc.
dsr
Sets or gets the configuration of the DSR serial interface control signal (data set
ready). This command is only applicable if you have a V.35 network interface
connected to your system.
Syntax
dsr <get|normal|inverted>
Feedback Examples
• dsr normal
returns
dsr normal
• dsr inverted
returns
dsr inverted
• dsr get
returns
dsr inverted
Comments
The default setting for this signal is “normal” .
Parameter Description
get Returns the current setting.
normal Sets the signal to normal (high voltage is logic 1).
inverted Sets the signal to inverted (low voltage is logic 1).