Specifications

System Commands
Polycom, Inc. 4–107
dns
Sets or gets the configuration for up to four DNS servers.
Syntax
dns get {1..4}
dns set {1..4} “xxx.xxx.xxx.xxx”
Feedback Examples
• dns set 1 192.168.1.205
returns
dns 1 192.168.1.205
Comments
After making a change, you must restart the system for the setting to take
effect. These values cannot be set if the system is in DHCP client mode.
Parameter Description
get Returns the current IP address of the specified server.
A server identification number
{1..4} is required.
{1..4} Specifies the server identification number.
set Sets the IP address of the specified DNS server when
followed by the
“xxx.xxx.xxx.xxx” parameter.
A server identification number
{1..4} is required.
“xxx.xxx.xxx.xxx” Specifies the IP address for the specified server.