Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4–84 Polycom, Inc.
contentsplash
Enables or disables the splash screen display on content monitors.
Syntax
contentsplash <get|yes|no>
Feedback Examples
• contentsplash get
returns
contentsplash yes
• contentsplash yes
returns
contentsplash yes
• contentsplash no
returns
contentsplash no
Comments
The splash screen displays a Polycom logo on content-only displays when
neither the near end nor the far end is sending content, and when the Polycom
HDX system is not in sleep mode.
By default, the content splash value is set to yes.
When the content splash value is set to no, black video or no signal is sent to
the monitor, depending on the screen saver output configured for the monitor.
The content splash setting is persistent across the power cycle.
See Also
monitor1screensaveroutput command on page 4-220 and
monitor2screensaveroutput command on page 4-222 .
Parameter Description
get Returns the current setting.
yes Turns on the content splash screen.
no Turns off the content splash screen.