Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4–62 Polycom, Inc.
callinfo
Returns information about the current call. If you are in a multipoint call, this
command returns one line for each site in the call.
Syntax
callinfo all
callinfo callid “callid”
Feedback Examples
• callinfo all
returns
callinfo begin
callinfo:43:Polycom HDX Demo:192.168.1.101:384:connected:
notmuted:outgoing:videocall
callinfo:36:192.168.1.102:256:connected:muted:outgoing:vide
ocall
callinfo end
• callinfo callid 36
returns
callinfo:36:192.168.1.102:256:connected:muted:outgoing:vide
ocall
• callinfo all
returns
system is not in a call
when no call is currently connected
Comments
The callid information is returned using the following format:
callinfo:<callid>:<far site name>:<far site number>:<speed>:
<connection status>:<mute status>:<call direction>:<call type>
Parameter Description
all Returns information about each connection in the call.
callid Returns information about the connection with the
specified call ID.