Specifications

System Commands
Polycom, Inc. 4–31
Feedback Examples
• audiometer micleft
returns
audiometer micleft level peak:-19
audiometer micleft level peak:-19
audiometer micleft level peak:-19
audiometer micleft level peak:-20
audiometer micleft level peak:-20
audiometer micleft level peak:-20
audiometer micleft level peak:-20
and so on until you enter
audiometer off
• audiometer micright
returns
audiometer micright level peak:-19
audiometer micright level peak:-19
audiometer micright level peak:-19
audiometer micright level peak:-20
audiometer micright level peak:-20
audiometer micright level peak:-20
audiometer micright level peak:-20
and so on until you enter
audiometer off
Comments
Audio level of a port is measured on the spectrum ranging from -20 dB to
+20 dB. Use the audiometer command for a different port to stop monitoring
a previous port and to begin monitoring a new port. To turn off monitoring,
use audiometer off and watch for the audiometer off acknowledgement or
registration response, which confirms that the audiometer monitoring is
turned off.
farendright Measures the strength of the signal on the right
channels of all far-site audio inputs.
farendleft Measures the strength of the signal on the left channels
of all far-site audio inputs.
off Turns off audiometer output.
Parameter Description