Switch User Manual

Field Verified Configuration Guide
PN: 1725-36047-001_G.doc
6
6. The following table shows additional settings for the
Switch/General configuration. Navigate to this page by clicking the
Switch tab at the top of the screen and General in the navigation
pane.
Parameter Setting Criticality
Enable multicast support Enabled Required
7. Click the Apply button to save the changes
8. The following table shows additional settings for the
WLAN
configuration. Navigate to this page by clicking the
WLAN tab at
the top of the page and then clicking the
Edit button for the WLAN
you are using for the SpectraLink Wireless Telephones.
Parameter Setting Criticality
Radio policy 802.11b only Recommended
Admin status Checked Required
Session timeout 0 (zero) Required
Quality of service Gold Required
Blacklist timeout 60 Recommended
DHCP required As required by installation
DHCP server IP address As required by installation
VLAN As required by installation
Layer 2 security Static WEP Recommended
MAC filtering Not checked Recommended
Layer 3 security None Required
Web authentication Not checked Required
WEP key size * 40 or 104 bits Recommended
Key index * As required for installation Recommended
Encryption key * As required for installation Recommended
Key format * Hex Recommended
* These parameters are required if Static WEP is selected for Layer 2 security.
9. Click the Apply button to save the changes.
10. Click the
Save Configuration link at the top of the browser window
to ensure the configuration is available across system restarts.
The Airespace Wireless Enterprise Platform is now ready for use with
SpectraLink Wireless Telephones. No restart of the system is required.
All parameters take effect when applied.