Specifications
System Commands
4 - 23
briallenable
Sets or gets the configuration of all ISDN BRI lines. This command is only
applicable if you have a BRI network interface connected to your system.
Syntax
briallenable <get|yes|no>
Feedback Examples
• bri1enable yes
• bri2enable yes
• bri3enable yes
• bri4enable yes
Comments
briallenable yes
only enables lines where the directory numbers have been
populated.
Parameter Description
get
Returns the status of all BRI lines—yes if enabled, no if
disabled.
yes
Enables all BRI lines.
no
Disables all BRI lines.