Specifications

System Commands
4 - 19
autoanswer
Sets or gets the Auto Answer Point to Point Video mode, which determines
how the system will handle an incoming call in a point-to-point video
conference.
Syntax
autoanswer <get|yes|no|donotdisturb>
Feedback Examples
• autoanswer donotdisturb
• autoanswer no
• autoanswer yes
Comments
If
autoanswer is set to no or donotdisturb , you must rely on API session
notifications to answer inbound calls.
Parameter Description
yes Allows any incoming video call to be connected
automatically. This is the default setting.
no Prompts the user to answer incoming video calls.
donotdisturb Notifies the user of incoming calls, but does not
connect the call. The site that placed the call receives a
Far Site Busy (H.320) or Call Rejected (H.323) code.
get Returns the current setting.