Specifications

System Commands
4 - 11
all register
Registers for most commonly-used user registration events.
Syntax
all register
Feedback Examples
all register
might return
callstate registered
camera registered
chaircontrol register
linestate registered
mute registered
pip registered
popupinfo registered
preset registered
screen registered
vcbutton registered
volume registered
sleep registered
Comments
Registers changes to any of the following types of parameters:
Current near-site or far-site source
State of privacy
Current volume level
Active camera presets
Status of point-to-point or multipoint calls
Status of physical ISDN/IP connection to codec
PIP state
Chair control
System information
Gatekeeper status
This command is particularly useful when two different control systems are
being used simultaneously, such as the web and API commands. The system
maintains the registration changes through restarts.
To register for events not included in this feedback, refer to the specific
registration command.
See Also
The
registerall command on page 4-188 is an alias for this command.
To unregister user feedback, use the
all unregister command on page 4-12
or the
unregisterall command on page 4-230.