Specifications

System Commands
4 - 7
adminpassword
Sets or gets the remote access password. This command is not supported on
the serial port.
Syntax
adminpassword get
adminpassword set [“password”]
Feedback Examples
•
cannot change password if one is not set (returned if no remote access
password is set)
•
adminpassword set Mypsswd
returns
adminpassword Mypsswd
• adminpassword set “My psswd”
returns
error: command has illegal parameters
Parameter Description
get Returns the current remote access password.
set Sets the password used for remote management of the
system if followed by the password parameter. To
erase the current setting, omit the password parameter.
“password” User-defined password. Valid characters are: a through
z (lower and uppercase), - , _ , @ , / , ; , , , . , \ , 0
through 9 . The password cannot include spaces.