Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4 - 250
wanipaddress
Sets or gets the WAN IP address.
Syntax
wanipaddress get
wanipaddress set [“xxx.xxx.xxx.xxx”]
Feedback Examples
wanipaddress set 192.168.1.122
returns
wanipaddress 192.168.1.122
Comments
The NAT Configuration option on the same page must be set to Auto,
Manual, or UPnP for this option to be available.
Parameter Description
set Sets the WAN IP address when followed by the
“xxx.xxx.xxx.xxx” parameter. To erase the current
setting, omit the
“xxx.xxx.xxx.xxx” parameter.
get Returns the WAN IP address.
“xxx.xxx.xxx.xxx” WAN IP address.