Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4 - 202
screen
Returns the name of the current user interface screen on the system, registers
or unregisters for screen changes, or goes to a specific user interface screen.
Syntax
screen
screen register get
screen [register|unregister]
screen “screen_name”
Feedback Examples
Key off of
“screen:”
•
screen
might return
screen: adminsettings
• screen register
might return
screen registered
systemsetup
adminsettings- screen: monitors
screen: tvmonitors
screen: cameras
Parameter Description
screen Returns the name of the current user interface screen if
not followed by other parameters.
register Registers for user interface screen changes. In register
mode, the name of every screen accessed is listed.
get Returns the registration state for screen change events
when followed by the get parameter.
unregister Unregisters from user interface screen changes.
“screen_name” Changes the user interface to display the specified
screen. The supported screens depend on the system
configuration.