Specifications

System Commands
4 - 197
rs232 mode
Sets or gets the operational mode of the first RS-232 port. For systems with two
serial ports, use
rs232port1 mode to set the mode for the second serial port.
Syntax
rs232 mode <get|passthru|control|debug|camera_ptz|closed_caption|
vortex_mixer|cps|interactive_touch_board|polycom_annotation|smartboa
rd|pointmaker>
rs232port1 mode <get|passthru|control|debug|camera_ptz|closed_caption|
vortex_mixer|cps|interactive_touch_board|polycom_annotation|smartboa
rd|pointmaker>
Feedback Examples
• rs232 mode control
• rs232 mode debug
Parameter Description
get Returns the current mode setting.
passthru Sets the RS-232 port to Pass Thru mode.
contol Sets the RS-232 port to Control mode.
debug Sets the RS-232 port to Debug mode.
camera_ptz Sets the RS-232 port to Camera PTZ mode.
closed_caption Sets the RS-232 port to Closed Caption mode.
vortex_mixer Sets the RS-232 port to Vortex Mixer mode.
cps|interactive_touc
h_board|polycom_anno
tation|smartboard|
pointmaker
Reserved for future applications.
rs232port1 Specifies serial port 2 on systems with two ports.