Specifications

System Commands
4 - 179
pridialchannels
Sets or gets the number of PRI channels to dial in parallel. This command is
only applicable if you have a PRI network interface connected to your system.
Syntax
pridialchannels get
prichannels set {1..n}
Feedback Examples
pridialchannels set 3
returns
pridialchannels 3
Comments
By default, ISDN channels are dialed three at a time. On PRI systems, you can
choose the number of channels to dial in parallel.
Parameter Description
set Sets the number of PRI channels to be dialed in
parallel when followed by a parameter from {1..n} . To
erase the current setting, omit the parameter.
get Returns the current number of channels dialed in
parallel.
{1..n} Range of numbers of PRI channels that can be dialed
in parallel. For PRI T1, the range is
1..12 . For PRI E1,
the range is 1..15 .