Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4 - 174
preset
Sets or gets the presets or goes (moves) to the presets for the near or far camera
source. Also registers or unregisters the API session to give notification when
the user sets or goes to presets.
Syntax
preset <register|unregister>
preset register get
preset far <go|set {0..15}>
perset near <go|set {0..99}>
Feedback Examples
•
preset registered
• preset unregistered
• preset near go 1
• preset far set 3
• preset near set 2
causes the current location/position of the near-site camera to be saved as
preset 2
Comments
Up to 100 preset camera positions can be set. These camera presets can be
distributed across the far camera and up to four near-site cameras.
Parameter Description
register Registers the system to give notification when the user
or far site sets or goes to a preset. Returns the current
preset registration state when followed by the get
parameter.
unregister Disables register mode.
far Specifies the far camera. Requires a set or go
parameter and a preset identifier.
go Moves the camera to a camera preset. Requires a
“preset” parameter.
set Sets a camera preset. Requires a “preset”
parameter.
{0..15} , {0..99} Camera preset identifier. Must be an integer in the
range {0..15} for a far-site camera or {0..99} for a
near-site camera.
near Specifies the near camera. Requires a set or go
parameter and a preset identifier.