Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4 - 172
pip
Sets or gets the on-screen PIP mode. The PIP feature allows the near site to
adjust near-camera views while in a video conference.
Syntax
pip <get|on|off|camera|swap|register|unregister|location>
pip location <get|0|1|2|3>
Feedback Examples
• pip on
• pip off
• pip camera
• pip swapped
• pip registered
• pip unregistered
• pip location 2
Parameter Description
get Returns the current setting.
on Enables PIP mode. The system shows a PIP window
that remains in the lower right corner of the screen until
the video call is completed.
off Disables PIP mode.
camera Causes the PIP window to appear when the selected
camera position is changed. The PIP window
disappears when the camera has finished moving.
swap Toggles the content of the PIP and the main display
between the near-site and far-site view.
register Registers the system to give notification when PIP is
turned on or off.
unregister Unregisters the system to give notification when PIP is
turned on or off.
location Places the PIP window in the specified corner of the
screen:
0 = bottom right corner
1 = top right corner
2 = top left corner
3 = bottom left corner
get = Returns the current location