Specifications

System Commands
4 - 167
ntpserver
Sets or gets an Network Time Protocol (NTP) server, using the IP address or
the DNS name of the server.
Syntax
ntpserver get
ntpserver set [“xxx.xxx.xxx.xxx”|“server name”]
Feedback Examples
•
ntpserver <empty>
• ntpserver set time.xyzcorp.com
returns
ntpserver time.xyzcorp.com
Comments
This command allows you to use an internal time server and thus synchronize
the system’s time with the time on your internal network. The system uses this
time only for the local Call Detail Report.
Parameter Description
get Gets the IP address of the NTP server.
set Sets the IP address of the NTP server when followed
by a valid parameter. To erase the current setting, omit
the parameter.
“xxx.xxx.xxx.xxx” The IP address of the NTP server.
“server name” The DNS name of the NTP server.