Specifications
Integrator’s Reference Manual for Polycom HDX Systems
4 - 160
nearloop
Activates or deactivates the Near End Loop test.
Syntax
nearloop <on|off>
Feedback Examples
•
nearloop on
returns
nearloop on
cs: call[41] chan[0] dialstr[] state[ALLOCATED]
active: call[41] speed[384]
•
nearloop off
returns
nearloop off
cleared: call[41]
dialstring[IP: NAME:]
ended: call[41]
Comments
When Near End Loop is on, you can test the encoder/decoder on the system.
This can help you diagnose a problem with a video call. If you perform a near
end loop test during a call, the far site sees a loop of itself.
Parameter Description
on
Activates the Near End Loop, a complete internal test
of the system.
off
Deactivates the Near End Loop.