Specifications

System Commands
4 - 125
ipdialspeed
Sets or gets the valid IP dialing speed, and enables or disables the specified
speed.
Syntax
ipdialspeed get “valid speed”
ipdialspeed set “valid speed” <on|off>
Feedback Examples
ipdialspeed get 168
returns
ipdialspeed 168 off (if the specified speed is disabled)
ipdialspeed 168 on (if the specified speed is enabled)
Parameter Description
get Returns the current setting. The parameter “valid
speed” is required.
“valid speed” Valid speeds are: 56, 64, 2x56, 112, 2x64, 128, 168,
192, 224, 256, 280, 320, 33 6, 384, 392, 7x64, 8x56,
504, 512, 560, 576, 616, 640, 672, 704, 728, 768, 784,
832, 840, 16x56, 14x64, 952, 960, 1008, 1024, 1064,
1088, 1120, 1152, 1176, 1216, 1232, 1280, 1288,
24x56, 21x64, 1400, 1408, 1456, 1472, 1512, 1536,
1568, 1600, 1624, 1664, 1680, 1728, 1736, 32x56,
28x64, 1848, 1856, 1904, and 1920 kbps.
set Sets the IP dialing speed. The parameters “valid
speed” and on or off are required.
on Enables the specified speed.
off Disables the specified speed.