Specifications

System Commands
4 - 115
hangup
Hangs up the current video or phone call.
Syntax
hangup phone
hangup video [“callid”]
hangup all
Feedback Examples
hangup video 2
returns
hanging up video call
cleared: call[xx]
dialstring[comm port: dialstr] NAME:system name]
ended: call[xx]
and disconnects the specified site, leaving other sites connected
Comments
After sending the
hangup command, feedback that the call has ended can take
up to 15 seconds.
Parameter Description
phone Disconnects the current analog phone (audio-only) site.
video Disconnects the current video call. If the “callid”
parameter is omitted, the system disconnects all video
far sites in the call.
all Disconnects all video and audio sites in the call.