Specifications

System Commands
4 - 59
diffservaudio, diffservfecc, diffservvideo
Sets or gets the DiffServ option and specifies a priority level for audio, far-end
camera control (FECC), and video, respectively. The priority level value for
each can be between 0 and 63.
Syntax
diffservaudio get
diffservaudio set {0..63}
diffservfecc get
diffservfecc set {0..63}
diffservvideo get
diffservvideo set {0..63}
Feedback Examples
•
diffservaudio set 2
• type of service ip-precedence (returned if typeofservice command on
page 4-228 is not set to
diffserv )
Comments
If
typeofservice is set to ip-precedence , these commands are not applicable.
Parameter Description
get Returns the current setting.
set Sets the command. A priority level in the range
{0..63} is required.
{0..63} Specifies the priority level.