Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4 - 52
dcdfilter
Sets or gets the filter setting of the DCD serial interface control signal (data
carrier detect). This command is only applicable if you have a V.35 network
interface connected to your system.
Syntax
dcdfilter <get|on|off>
Feedback Examples
• dcdfilter on
• dcdfilter off
Comments
When this filter is enabled, DCD drops for 60 seconds before changing the call
state. The default setting for this signal is
“off” .
Parameter Description
get Returns the current setting.
on Enables the DCD filter.
off Disables the DCD filter.