Specifications

Integrator’s Reference Manual for Polycom HDX Systems
4 - 32
camera
Sets or gets the near-site or far-site camera settings.
Syntax
camera near {1..6}
camera far {1..5}
camera <near|far> move <left|right|up|down|zoom+|zoom-|stop>
camera <near|far> move <continuous|discrete>
camera <near|far> source
camera <near|far> stop
camera near <getposition|setposition “x” “y” “z”>
camera near ppcip
camera for-people {2..5}
camera for-content {2..5}
camera list-content
camera <register|unregister>
camera register get
Parameter Description
near Specifies that the command selects or controls the near
camera.
far Specifies that the command selects or controls the far
camera.
{1..6} , {1..5} Specifies a near or far camera as the main video
source. camera near 6 selects People+Content™ IP if
it is running and connected to the system.
move Changes the near or far camera’s direction or zoom.
Only continuous and discrete return feedback. Valid
directions are: left, right, up, down, zoom+, zoom-,
stop, continuous, and discrete.
left Starts moving the camera left.
right Starts moving the camera right.
up Starts moving the camera up.
down Starts moving the camera down.
zoom+ Starts zooming in.
zoom- Starts zooming out.
stop Stops the near or far camera when in continuous mode.
Returns no feedback.
continuous Selects continuous movement mode. The camera will
move in direction specified until a
camera <near|far>
move stop
command is sent.