Datasheet

Internet and Intranet Calling with Polycom PVX 8.0.1
- 14 -
To select a default adapter:
1. In PVX, click Setup > Network to open the Network tab.
2. On the Network Setup page, click the Connection tab.
3. Clear the checkbox for Use Windows default adapter.
4. In the dropdown list, select the adapter you want to use.
5. Click Apply.
Configuring Your Connection from the PVX Application
If you need to change your connection settings after you finish the setup wizard, you can
do so through the PVX application.
To change your connection settings:
1. In PVX, click Setup > Network to open the Network tab.
2. On the Network Setup page, select the Connection tab.
3. Configure the selections for your connection as follows.
For this connection
type...
Do this...
Intranet 1. Select Directly connected to a LAN or behind a fully aware
firewall.
2. Click Apply.
VPN 1. Select Connected over VPN.
2. Do one of the following:
- If you are already logged in to VPN, select Use virtual
network adapter for VPN and select your connection from
the list.
- If you arenot already logged in to VPN, select Do not use
virtual network adapter for VPN. Choose whether to let
PVX automatically detect a VPN IP address within a subnet
or manually specify the VPN IP address obtained from your
VPN client.
3. Click Apply.