Datasheet

Internet and Intranet Calling with Polycom PVX 8.0.1
- 11 -
1. In a browser such as Internet Explorer, type the IP address of your router.
Consult your Linksys user documentation for the IP address.
2. Log in to your router setup. Consult your Linksys user documentation for the
user name and password.
3. Locate the Port Range Forwarding page. (Depending on your router model,
Port Range Forwarding may be listed in the Advanced or the Applications and
Gaming menu.)
4. On the Port Range Forwarding page, enter the following information for the
first port in Table 1.
5. Repeat step 4 of this procedure for the remaining ports in Table 1.
6. When you have opened and assigned all of the ports listed in Table 2, review
the Port Range Forwarding list. Check that all of the ports are correct, enabled,
and assigned to the correct IP (internal) Address as shown in the following
figure.
D-Link Routers
The following procedure applies to the D-Link DI-604 router. The screens and settings may
vary slightly for different D-Link models. Follow these steps to configure your D-Link
router:
1. In a browser such as Internet Explorer, type the IP address of your router.
Consult your D-Link user documentation for the IP address.
2. Log in to your router setup. Consult your D-Link user documentation for the
user name and password.
In this field... Enter this information...
Application Any unique identifier such as “H.323 call setup”
Start Port or the starting value of the range listed in Table 1
End Port or the ending value of the range listed in Table 1
TCP/UDP Port type listed in Table 1. Where Table 1 lists both TCP and UDP,
enter the Application twice-once as TCP and once as UDP.
IP Address Internal IP address that the NAT has assigned to your computer
Enabled Click this box.