Datasheet

Deployment Guide for Maximum Security Environments
Polycom, Inc. 7
Configuring Security Settings in a Web Browser
You can configure some of the security settings on the local HDX system
screens. For other security settings, however, you must use the HDX system
web interface.
Using the Maximum Security Profile
The Maximum Security Profile lets you control particular fields to meet the
highest security requirements (for example, systems used in government or
military environments). The Security Profile can be set only in the setup
wizard. You can run the setup wizard:
• At initial setup
• When you select Erase System Flash Memory during a system update
• After a system reset when system settings are deleted
After the setup wizard is complete, the Security Profile setting appears as
read-only in the Admin Settings.
To set the Security Profile to Maximum:
>> In the setup wizard, enable Security Mode and set Security Profile to
Maximum.
When you choose this setting, the system automatically sets certain fields to
predefined values. After you set the Security Profile to Maximum in the setup
wizard, some fields are restricted or not configurable. The fields controlled by
the profile are set to predefined values and might have additional restrictions
applied as described in the following tables.
Setup Wizard
Setting Restriction
Admin ID Must be changed.
User ID Must be changed.
User Room Password Must be entered.
User Remote Password Must be entered.
Admin Room Password Must be changed.
Admin Remote Password Must be changed.