Datasheet

Deployment Guide for Maximum Security Environments
Polycom, Inc. 11
You can configure the period of time, in hours, in which the failed login
threshold must be exceeded to lock the user’s account. This command can only
be changed through the command-line interface using the serial API:
loginwindowduration : Set to 1, range is 1 to 24. Off is not allowed.
External Authentication
Home Screen and Other Settings
Lock Port after Failed Logins Set to 3, configurable. Off is not allowed.
Port Lock Duration in Minutes Set to 1, configurable. Off is not allowed.
Setting Restriction
Setting Restriction
Enable Active Directory
Authentication
Enabled, configurable.
Setting Restriction
Idle Session Timeout in Minutes Set to 10, configurable. Off is not allowed.
Lock Port after Failed Logins Set to 3, configurable. Off is not allowed.
Port Lock Duration in Minutes Set to 1, configurable. Off is not allowed.
Setting Restriction
Serial Ports: RS-232 Mode Set to Off, configurable (only Control is
allowed).
SIP Transport Protocol SIP not available.
Directory Servers Only LDAP available.
Auto Answer Point-to-Point Video Disabled, configurable.
Auto Answer Multipoint Video Disabled, configurable.
Availability Control Enabled, not configurable.
Recent Calls Disabled, not configurable.
Last Number Dialed Disabled, not configurable.
Far Control of Near Camera Disabled, configurable.