User`s guide

Polycom VVX Expansion Module Administrator’s Guide Addendum UC Software 4.1.6
Polycom, Inc. 42
Parameter
Permitted Values
Default
reg.x.dialPlanName
String
Null
If reg.x.server.y.specialInterop is set to lync2010, the dial plan name from the Microsoft Lync Server is
stored here. Each registration has its own name for this dial plan. Note: Do not change this parameter if set by
Microsoft Lync.
reg.x.displayName
UTF-8 encoded
string
Null
The display name used in SIP signaling and/or the H.323 alias used as the default caller ID.
reg.x.filterReflectedBlaDialogs
0 or 1
1
If 0, bridged line appearance NOTIFY messages (dialog state change) will not be ignored. If 1, the messages will be
ignored.
reg.x.fwd.busy.contact
string
Null
The forward-to contact for calls forwarded due to busy status. If Null, the contact specified by divert.x.contact
will be used.
reg.x.fwd.busy.status
0 or 1
0
If 0, incoming calls that receive a busy signal will not be forwarded. If 1, busy calls are forwarded to the contact
specified by reg.x.fwd.busy.contact.
reg.x.fwd.noanswer.contact
string
Null
The forward-to contact used for calls forwarded due to no answer. If Null, the contact specified by
divert.x.contact will be used.
reg.x.fwd.noanswer.ringCount
0 to 65535
0
The number of seconds the phone should ring for before the call is forwarded because of no answer. Note: The
maximum value accepted by some call servers is 20.
reg.x.fwd.noanswer.status
0 or 1
0
If 0, calls are not forwarded if there is no answer. If 1, calls are forwarded to the contact specified by
reg.x.noanswer.contact after ringing for the length of time specified by reg.x.fwd.noanswer.ringCount.
reg.x.ice.turn.callAdmissionControl.enabled
0 or 1
0
If 0, call admission control is disabled. If 1, call admission control is enabled for calls using the Microsoft Lync 2010
Server.
reg.x.label
UTF-8 encoded
string
Null
The text label that displays next to the line key for registration x. If Null, the user part of reg.x.address is used.
reg.x.lcs
0 or 1
0
If 0, the Microsoft Live Communications Server (LSC) is not supported for registration x. If 1, LSC is supported.
reg.x.lineKeys
1 to max
1
The number of line keys to use for a single registration. The maximum number of line keys you can use per
registration depends on your phone model.