User`s guide

Polycom VVX Expansion Module Administrator’s Guide Addendum UC Software 4.1.6
Polycom, Inc. 41
Registration Parameters
Parameter
Permitted Values
Default
reg.x.acd-login-logout
reg.x.acd-agent-available
0 or 1
0 or 1
0
0
If both ACD login/logout and agent available are set to 1 for registration x, the ACD feature will be enabled for that
registration.
reg.x.address
string address
Null
The user part (for example, 1002) or the user and the host part (for example, [e-mail]) of the
registration SIP URI or the H.323 ID/extension.
reg.x.applyServerDigitMapLocally
0 or 1
0
If 1 and reg.x.server.y.specialInterop is set to lync2010, the phone uses the dial plan from the
Microsoft Lync Server. Any dialed number will apply the dial plan locally. If 0, the dial plan from the Microsoft Lync
Server is not used.
reg.x.auth.domain
string
Null
The domain of the authorization server that is used to check the user names and passwords.
reg.x.auth.optimizedInFailover
0 or 1
0
The destination of the first new SIP request when failover occurs. If 0, the SIP request is sent to the server with the
highest priority in the server list. If 1, the SIP request is sent to the server which sent the proxy authentication
request.
reg.x.auth.password
string
Null
The password to be used for authentication challenges for this registration. If the password is non-Null, it will
override the password entered into the Authentication submenu on the Settings menu of the phone.
reg.x.auth.userId
string
Null
User ID to be used for authentication challenges for this registration. If the User ID is non-Null, it will override the
user parameter entered into the Authentication submenu on the Settings menu of the phone.
reg.x.auth.useLoginCredentials
0 or 1
0
If 0, login credentials are not used for authentication to the server on registration x. If 1, login credentials are used
for authentication to the server.
reg.x.bargeInEnabled
0 or 1
0
If 0, barge-in is disabled for line x. If 1, barge-in is enabled (remote users of shared call appearances can interrupt
or barge in to active calls).
reg.x.callsPerLineKey
1
1 to 4, 1 to 8, 1 to
24
24 (for VVX phones)
8 (for all other phones)
Set the maximum number of concurrent calls for a single registration x. This parameter applies to all line keys using
registration x. If registration x is a shared line, an active call counts as a call appearance on all phones sharing that
registration. This parameter overrides call.callsPerLineKey.
reg.x.csta
0 or 1
0
If 0, the uaCSTA (User Agent Computer Supported Telecommunications Applications) feature is disabled. If 1,
uaCSTA is enabled (overrides the global parameter voIpProt.SIP.csta.