User`s guide

Polycom VVX Expansion Module Administrator’s Guide Addendum UC Software 4.1.6
Polycom, Inc. 40
Parameter
Permitted Values
Default
feature.presence.enabled
1
0 or 1
0
If 0, the presence feature—including buddy managements and user status—is disabled. If 1, the presence
feature is enabled with the buddy and status options.
1
Change causes phone to restart or reboot.
<pres/>
The parameter pres.reg is the line number used to send SUBSCRIBE. If this parameter is missing, the
phone uses the primary line to send SUBSCRIBE.
Presence Parameters
Parameter
Permitted Values
Default
pres.idleSoftkeys
0 or 1
1
If 0, the MyStat and Buddies presence idle soft keys do not display. If 1, the soft keys display.
pres.idleTimeout.offHours.enabled
0 or 1
1
If 0, the off hours idle timeout feature is disabled. If 1, the feature is enabled.
pres.idleTimeout.offHours.period
1 to 600
15
The number of minutes to wait while the phone is idle during off hours before showing the Away presence status.
pres.idleTimeout.officeHours.enabled
0 or 1
1
If 0, the office hours idle timeout feature is disabled. If 1, the feature is enabled.
pres.idleTimeout.officeHours.period
1 to 600
15
The number of minutes to wait while the phone is idle during office hours before showing the Away presence
status.
pres.reg
1 to 34
1
The valid line/registration number that is used for presence. This registration sends a SUBSCRIBE for presence.
If the value is not a valid registration, this parameter is ignored.
<reg/>
In the following tables, x is the registration number. For VVX 300, 310, 400, 410, 500, and 600 phones
with three connected expansion modules, x=1–34.
Tables Registration Parameters and Registration Server Parameters show the registration parameters
and the server registration parameters.