User`s guide

Polycom, Inc. 35
Configuration Parameters
This reference section shows the UC software configuration parameters used to configure the features
and functions for VVX phones and expansion modules running UC software 4.1.6 or later. The following
information is helpful if you need a detailed description of a particular configuration parameter or want to
see the default or permitted values for that parameter. See the Polycom UC Software 4.1.0
Administrators’s Guide for a full list of parameters used to configure Polycom VVX business media
phones. See the Polycom UC Software 4.1.6 Release Notes for a list of parameters added for UC
Software 4.1.6.
Note: Configuration Parameters Not Runtime Configurable
Configuration parameters for UC software 4.1.6 are not runtime configurable, and the VVX
phones and modules need to be rebooted after any configuration changes.
<attendant>
The Busy Lamp Field (BLF)/attendant console feature enhances support for phone-based monitoring. In
the following table, x is the monitored user number.
Attendant/Busy Lamp Field Parameters
Parameter
Permitted Values
Default
attendant.reg
1
positive integer
1
The index of the registration that will be used to send a SUBSCRIBE to the list SIP URI specified in
attendant.uri. For example, attendant.reg = 2 means the second registration will be used.
attendant.ringType
default, ringer1 to
ringer24
ringer1
The ringtone to play when a BLF dialog is in the offering state.
attendant.uri
1
string
Null
The list SIP URI on the server. If this is just a user part, the URI is constructed with the server hostname/IP. Note: If
this parameter is set, the individually addressed users configured by attendant.resourceList and
attendant.behaviors are ignored
attendant.behaviors.display.spontaneousCallAppearances.normal
1
Normal
attendant.behaviors.display.spontaneousCallAppearances.automat
a
1
Automatic
0 or 1
0 or 1
1
0
If 1, the normal or automatic call appearance is spontaneously presented to the attendant when calls are alerting on
a monitored resource (and a ring tone is played). If 0, the call appearance is not spontaneously presented to the
attendant. The information displayed after a press-and-hold of a resource's line key is unchanged by this parameter.