Mounting Instructions

Make sure the mount is oriented with the correct side against the wall and hold it up to the wall.
Line the top of the mount up with the first mark you made (in step 3).
Hold the mount so that it is centered on the center line you drew, then move the mount left or right
until you can see the pencil marks you drew to mark the center of the studs.
Trace the inside of 2 holes where your stud mark lines are visible.
6
Using a level, draw a line between the two stud marks. Make sure your line intersects
the center of both stud marks and is close to middle of the traced hole marks.
7
Mounting the Polycade
08