User Guide

Poly Studio E70 Release Notes 1.7.0
4
USB 3.0 Extenders and Cables
Note:
When possible, Poly recommends only using the USB-C to USB-A cable that comes with your
device. If you are using a network category-based USB extender, you must use Category 6A/7/8
cables that are terminated, and cable certified to the 10-gigabit network standard.
Model Part Number
Icron USB 3-2-1 Raven 3104 PRO 00-00451 (NA)
USB-A to USB-C w/Slim Connector – 10 m (32.8 ft) 2457-30757-110
USB-A to USB-C w/Slim Connector – 25 m (82 ft) 2457-30757-125
USB-A to USB-C w/Slim Connector – 40 m (131.2 ft) 2457-30757-140
USB-A to USB-C – 10 m (32.8 ft) 2457-30757-001
USB-A to USB-C – 25 m (82 ft) 2457-30757-025
USB-A to USB-C – 40 m (131.2 ft) 2457-30757-040
USB 2.0 Extenders and Cables
While the following USB 2.0 extenders can be used with your Studio E70, they offer limited performance
compared to USB 3.0 extenders and cables. To use the full capabilities, performance, and advanced
features of your Studio E70, Poly recommends using a USB 3.0 extender or cable.
Caution:
Do not connect the Sound Control USB extender to the Ethernet port on the Studio E70.
Connecting the RCU2S-E70 to the Studio E70 Ethernet port will damage the device, make it
inoperable, and void your warranty.
For information on connecting the Studio E70 to the RCU2S-E70 for the Poly Studio E70, see
the RCU2S-E70 USB Application Guide on the Sound Control website.
Model
Part Number
Icron USB 2.0 Ranger 2311 Poly PN: 2583-87590-001 (NA)
00-00401 (NA)
Sound Control RCU2S-E70 for the Poly Studio E70 RCU2S-E70