Users Manual

3.2 Poly Base Station Mechanics
The repeaters front end shows an LED indicator that signals different functional states of the repeater.
The indicator is off when the repeater is not powered on.
Hardware installation:
The repeater should be mounted on a wall in a height less than 2 meters.
Screws and Anchors needed (Not supplied by Poly)
2x Screws = Screw wall mount M3.5x31
2x Anchors: Length 29,6mm, OD 6,0mm, ID 4,8mm
NOTE: The repeater should be mounted on a wall not higher than 2 meters
3.4 Recommended external DC adapters
Part Nr Description Manufacturer Type
S005CAV0500100
SMPS,100-240VAC,5V 1000mA with
USB-A
Ten Pao International LTD
EU
S005CAB0500100 UK
S005CAS0500100 AU
S005CAU0500100
US