Users Manual

SME VOIP SYSTEM GUIDE 1.1 44 | P a g e
Proprietary and Confidential
AUTO RESYNC
PERIODIC (MIN)
0 Number of minutes between Auto Resync
AUTO RESYNC
MAX DELAY
(MIN)
15 Delay time in sec, to prevent all Base station asking for configuration fin at
the same time.
DHCP
CONTROLLED
CONFIG SERVER
Disabled Provisioning server options.
DHCP Option 66: Look for provision file by TFTP boot up server.
DHCP Custom Option: Look for provision file by custom option
DHCP Custom Option & Option 66: Look for provision file by first custom
option and then option 66.
From v460, the Base s
tation supports configuration files of up to 1 MB
DHCP CUSTOM
OPTION
Empty By default, option 160, but custom option can be defined.
An option 160 URL defines the protocol and path information by using a
fully qualified domain name for clients that can use DNS.
DHCP CUSTOM
OPTION TYPE
Empty URL: URL of server with path.
Example of URL: http://myconfigs.com:5060/configs
Default configuration file on server must follow the name: MAC.cfg
IP Address: IP of server with path.
Text messaging:
PARAMETER
DEFAULT VALUE
DESCRIPTION
TEXT MESSAGING Disabled Disable/enable messaging using a Message/Alarm server
Enable Without Server. With this setting handset can send messages to
other handsets, which support messaging.
TEXT MESSAGING
& ALARM SERVER
Empty Permitted value(s): AAA.BBB.CCC.DDD or <URL>
Note: Text messaging server uses UDP and does not support TLS
TEXT MESSAGING
PORT
1300 Port number of message server.
TEXT MESSAGING
KEEP ALIVE (M)
30 This defines the frequency of how keep-alive are sent
Permitted values: Positive integer, unit is in minutes
TEXT MESSAGING
RESPONSE (S)
30 This defines the frequency of how response timeout
Permitted values:
Positive integer, unit is in seconds
TEXT MESSAGING
TTL
0 This defines the text messaging time to live
Permitted values: Positive integer, unit is in seconds
Terminal:
PARAMETER DEFAULT VALUE DESCRIPTION
KEEP ALIVE (M) 0 If different from “0” the handset sends a (emergencyLocationMsg)
containing the RSSI measurements with interval “x” that is set.
Permitted values:
Positive integer, unit is in minutes
AUTO STOP
ALARM
Disabled Enable to activate “AUTO STOP ALARM DELAY”
AUTO STOP
ALARM DELAY (S)
30 Handset automatically stops alarm announcement (emergencySms) after
“x” sec.