Users Manual

SME VOIP SYSTEM GUIDE 1.1 26 | P a g e
Proprietary and Confidential
PARAMETER DEFAULT VALUE(S) DESCRIPTION
LINE NAME Empty Name of line shown to be used to show from which line the incoming
call is coming and used when user must select from which line to make
outgoing call.
HANDSET New Handset The extension must be associated to a handset. By default, a new
handset can be configured, alternatively the user can select an already
existing handset Idx.
EXTENSION Empty Handset phone number or SIP username depending on the setup.
Possible value(s): 8-bit string length
Example: 1024, etc.
Note: The Extension must also be configured in SIP server in order for
this feature to function.
AUTHENTICATION
USER NAME
Empty Username: SIP authentication username
Permitted value(s): 8-bit string length
AUTHENTICATION
PASSWORD
Empty Password: SIP authentication password.
Permitted value(s):
8
-
bit string length
DISPLAY NAME Empty Human readable name used for the given extension
Permitted value(s): 8-bit string length
XSI USERNAME Empty Username: SIP authentication username
Permitted value(s):
8
-
bit string length
XSI PASSWORD Empty Password: SIP authentication password.
Permitted value(s): 8-bit string length
MAILBOX NAME Empty Name of centralized system used to store phone voice messages that
can be retrieved by recipient later.
Valid Input(s):
8
-
bit string Latin characters for the Name
MAILBOX
NUMBER
Empty Dialed mail box number by long key press on key 1.
Valid Input(s): 0 – 9, *, #
Note: Mailbox Number parameter is available only when it’s enabled
from SIP server.
SERVER Server 1 IP FQDN or IP address of SIP server.
Drop down menu to select between the defined Servers of SME VoIP
Service provider.
CALL WAITING
FEATURE:
Enabled Used to enable/disable Call Waiting feature. When disabled a second
incoming call will be rejected. If enabled a second call will be
presented as call waiting.
BROADWORKS
BUSY LAMP FIELD
LIST URI
Empty The “BLF” feature on the IP phones allows a specific extension to be
monitored for state changes. BLF monitors the status (busy or idle) of
extensions on the IP phone
Permitted value(s): URL String
Note: This feature does not work with Group call. Therefore, Group
call should be disabled.
BROADWORKS
SHARED CALL
APPEARANCE
Disabled Enable Shared Call Appearance (SCA) to allow a group of SIP phones to
receive inbound calls directed to a single destination (shared line); that
way, any phone from this group can answer the call, barge-in to the
active call, or retrieve the call placed on hold.
Note: Must be supported by SIP server
BROADSOFT
FEATURE EVENT
PACKAGE
Disabled If enabled the given SIP extension subscribes for the Broadsoft
Application Server Feature Event Package, and it becomes ready for
reception of SIP NOTIFY with status on the following Broadsoft Server
Services:
-Do Not Disturb
-Call Forwarding (Always, Busy, No answer)
The received status will be displayed in the handset idle display.
UACSTA Disabled Enable/Disable uaCSTA support