Users Manual

SME VOIP SYSTEM GUIDE 1.1 69 | P a g e

Proprietary and Confidential

Screenshot

Good practice when adding repeaters to a Multi Cell system is to use manually registration, because then you can

control which Base station the repeater(s) connect to.

5.14.1.2 Local Automatical

Repeater controlled by auto detects best base signal and auto assign RPN. The RPN and DECT sync source are greyed

out.

Screenshot

The repeater RPN is dynamic assigned in base RPN range.

With local automatic mode repeater on repeater (chain) is not supported.

Adding a repeater makes it possible to register the repeater. Registration is made by selecting the repeater and

pressing Register repeater. The base window for repeater registration will be open until the registration is stopped. By

stopping the registration, all registration on the system will be stopped including handset registration.